TS140湿地推土机系半刚性悬挂、机械传动、液压操纵的履带推上机。它适用于在含水比较高、松软、粘性土质工矿下作业；并已使用除山场、岩石、砖瓦以及碎石现场以外的广泛工程现场。

 

TS140 Bulldozer is track-type model which utilizes semi-rigid suspension, mechanical drive and hydraulic control. It can be used in road building, hydro-electric construction，field modification，port and mine development and other constructions．

外形尺寸（长×宽×高）        5295×4000×2981mm

使用质量                      17.5  t

飞轮功率                      103   kW

最大牵引力                    121.0  kN

（有效牵引力取决于机重和地面附着性能）

接地压力（使用重量时）        27.5  kPa

最小转弯半径      　　        4.0m

最小离地高度     　　         392mm

坡行角度          　　        纵向30°，横向25°

40米运距工作效率             165m³／h

单铲容量                      3.7m³

 

Overall dimensions(L×W×H)                     

(length×width×height)                       5295×4000×2981mm

Operating weight                              17.5  t

Flywheelpower                                 103   kW

Max.drawbar pull                              121.0 kN

Ground pressure(at operating weight)          27.5  kPa

Min. turning radium                           4.0   m

Min. ground clearance                         392   mm

Gradient  longitudinal 30 °, transverse 25°

Working efficiency within 40 meters           165   m³/h

Blade capacity                                  3.7   m³

 

制造厂家                     上海柴油机股份有限公司

型号                         6135Ak-3s

型式                         水冷单行立式四冲程“ω”燃烧室

气缸数一缸径×行程式：       6-135×150mm

燃油泵类型                   B系列喷油泵

活塞总排量                   12   L

标定转速                     1800 r/min

标定功率                     114  kW

油耗(按标定功率时)              

燃油消耗量                   ≤238 g/kW·h

机油消耗量                   ≤3.4 g/kW·h

最大扭矩                     (≤1260r/min)≤ 726N·m

冷却方式                     闭式循环水冷却

起动方式                     24V电启动

空气滤清器                   卧式两级滤清

 

Manufacturer                  SHANGHAI DIESEL CO,.LTD

Model                        6135Ak-3S

Type                         Water-cooled , single row, vertical ,4-stroke-cycle

                             Diesel engine with “ω” combustion chamber

Number of cylinders-bore × stroke : 6-135×150 mm

Type of fuel pump              B series fuel injection pump

Piston displacement :            12L

Rated rotation speed :            1800 r/min

Rated horsepower :              114  kW

Oil consumption (rated horsepower)

Fuel consumption:               ≤238 g/kW·h

Engine oil                      ≤3.4 g/kW·h

Max. torque                   (≤1260r/min)≤726 N·m

Mode of cooling                closed circulation water cool

Mode of starting                 24V electric starting

Air cleaner                     horizontal two－stage filtering

 

 

 

 

 

主离合器为常开式、多片湿式粉末冶金摩擦片、液压助力操纵。变速箱采用常啮斜齿轮传动，结合套换档、双杆机械操纵，前进五档、后退四档。

行驶速度（按柴油机 1800r／min的理论速度）

前进：一挡 2.72km/h            后退：一挡 3.81 km/h

       二挡 3.84km/h                  二挡 5.36km/h

       三挡 6.13km/h                  三挡 9.58km/h

       四挡 8.14km/h                  四挡 11.37km/h

       五挡 11.46km/h

 

Main clutch: normally opened, multi-plate, powder metallurgy friction plate and hydraulic booster control.Transmission : normally meshed helical gear drive, coupling sleeve shift and two lever operation. The transmission has five forward speeds and four backward speeds .

Travel speed (as per diesel engine 1800r/min theoretical speed)

Forward                                 Backward

First  speed    2.72km/h                     First  speed      3.81 km/h

Second speed   3.84km/h                     Second speed      5.36km/h

Third speed     6.13km/h                     Third speed       9.58km/h

Forth speed     8.14km/h                     Forth speed       11.37km/h

Fifth speed     11.46km/h

 

 

 

 

 

转向离合器为湿式、多片粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵。

 

Steering clutch: Multiple-disc oil powder metallurgy disc compressed by spring. hydraulic operated. Brake is oil two direction floating band brake operated by mechanical foot pedal.

 

 

 

 

 

两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。

 

Two stage gear deceleration ,Duo-cone floating seal ,combined carrier roller to facilitate service.

 

 

 

 

 

行走架为凸扁钢焊接矩形截面,”八”字梁型式。支重轮、托链轮、引导轮均装有密封性好、寿命长的浮动油封。

支重轮（每侧）

      单边                四个

      双边                二个

托链轮（每侧）            二个

引导轮（每侧）            一个

履带型式                  三角形截面、宽幅、组合式

履带涨紧型式              液压涨紧

节矩                      203 mm

履带板数（每侧）          42 块

履带板宽                  1000 mm

履带接地长度              2920 mm

密封和润滑履带△

该履带的节距、履带板数、履带板宽与普通的履带相同。

 

Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring seal.

Track roller (each side):

Singe flange             4

Double flange           2

Carrier roller(each side):       2

Idler (each side)              1

Type of track:               double grouser combined

Tension mode of track:        hydraulic

Pitch:                      203mm

Number of shoes(each side)     42 pieces

Width of shoe                1000mm

Length of track on ground      2920mm

Sealed and lubricated track △

The pitch , numbers and width of track shoes are the same with the general track.

 

 

 

 

由装置油泵，液压控制箱及各种阀、油缸、滤油器和管路组成

油泵型式                          齿轮油泵

油泵型号                          CBF－E100A(反）

系统流量                          180  L/min 

系统压力                          11.77 MPa  

单阀：用于角铲

      用于推煤铲△

推土换向阀                         四位五通滑阀式

      阀位                        上升、下降、浮动、封闭

油缸数一缸径 x行程                2－￠100 x 1040 mm

双阀：用于角铲、松土器△

松土换向阀                         三位五通滑阀式

      阀位                         上升、下降、封闭

松土油缸数一缸径x行程             2－ ￠125 x 325mm

 

It is consists of implement oil pump，hydraulic tank and various valves，cylinders，filters and oil lines．

Pump type：             gear pump

Pump model：           CBF－E100A（reverse）

System flow：           180L／min

System pressure：         11．77   MPa

Single valve：           used in angle blade

                        Used in coal pushing blade△

Directions valves          Four positions，five way spool valve

Positions of valve          Raise, lower, floating, hold

Number of cylinders－bore×stroke        2－￠100 xl040mm

Double valves：           used in angle blade and ripper△

Ripper and direction valve

                        three positions，five way spool valve

Positions of valve          Raise, lower,hold

Number of ripper cylinders－bore×stroke:  2－￠125×325mm

 

 

 

 

噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。

备有以下驾驶室供用户选用

1、带空调器的驾驶室

2、翻车保护司机凉栅

3、简易司机凉棚。

 

 

The cab is equipped with adjustable seat and electric fan with the character of low noise and excellent viewing area．

The following cabs can be selected by users．

1．Cab with air-conditioner

2．Conopy with RopS

3．Simple structure canopy

 

 

 

 

加注部位                                  容量(L)

水箱及柴油机冷却水                         60

柴油机润滑系统用油                         25

分动箱、主离合器用油                       35

变速箱、后桥传动用油                       90

最终传动用油（单侧）                       24

工作装置液压系统用油                       85

柴油箱装柴油                               230

支重轮、引导轮、托链轮用油（每个）         0.35

 

Fill location                          Capacity(L)

Radiator and diesel engine water          60

Lubricating system of diesel engine    oil  25

Flywheel house, main clutch            oil  35

Transmission , bevel gear case         oil  90

Final drive(each)                      oil  24

Implement hydraulic system             oil  85

Fuel tank                              oil  230

Idler, track roller , carrier roller(each)   oil  0.35

 

 

 

 

 

铲刀型式                角铲

Blade                   Angle

铲刀宽（Width）         4000mm

铲刀高（Height）        960mm

最大切削深度（Max digging depth）400mm

最大提升高度（Ground clearance） 1000mm

 

 

 

 

 

松土铲数                   3        1

Number of shank         

长(Length)              1580mm   1580mm

宽(Width)               2020mm   1220mm

高(Height)              1236mm   1236mm

最大松土深度

(Max. penetration)      550mm    550mm

最大提升高度 

(Max. lifting height)   510mm    510mm

 

 

 

 

 

 

  注：△表示可选购件

Note：△indicates optional parts