宣工TS165-2湿地推土机

                                         TS165-2湿地推土机

 

 

TS165-2推土机系半刚性悬挂、机械传动、液压操纵、低比压履带推土机。该机性能优良，操作灵活方便，质量可靠，工作效率高，特别适合沼泽地和含水量比较高的松软地带使用。

 

TS165-2 bulldozer is semi-rigid suspended, mechanism transmitted, hydraulically controlled and track-type. It features reliable quality and better efficiency for easy operation. It is applicable particular in soft or sloppy working conditions.

 

 

 

外形尺寸(长×宽×高)    　5585×4222×3190 mm (含履刺)

使用质量    　　　　　　　18.3  t

飞轮功率    　　　　　　　121   kW

最大牵引力   　　　　　　 143.4 kN

(有效牵引力取决于机重和地面附着性能)

接地压力（使用重量）      28.3  KPa

最小转弯半径　　　　　　　4.0   m

最小离地间隙  　　　　　　352.5 mm

坡行角度　　　　　　　　　纵向 30度　　横向 25度

 

Overall dimensions (L×W×H) :           5585×4222×3190 mm

Operation weight:                       18.3  t

Flywheel power:                         121   kW

Max. drawbar pull:                      143.4 kN

(The efficient force depends on weight and ground surface adherence)

Ground pressure (at operating weight):  28.3 KPa

Min. ground radium:                     4.0 m

Min. ground clearance:                  352.5 mm

Grade ability:               Straight 30°  Side  25°

 

 

 

制造厂家  　　　　   潍坊柴油机股份有限公司

型号 　　　　　　    WD615T1-3B

形式  　　　　　　   直列、水冷、四冲程、增压、直喷

缸数--缸径X行程 　   6-126×130mm

总排量　　　　　　   9.726 L

标定功率             130   kW

额定转速             1800  r/min

油耗(标定功率)

燃油消耗量           ≤225 g/kW.h

机油消耗量           ≤1.8 g/kW.h

最大扭矩             870N.m/1200-1300rpm

冷却方式             闭式循环水冷却

启动方式             24V电启动

许用海拔             ≤4000m

 

Manufactured factory: WEIFANG DIESEL ENGINE CO., LTD

Model:  WD615T1-3B

Type:   straight line, water-cooled, with four stroke, pressure boost and direct injection

Number of cylinders-bore×stroke:   6-126×130mm

Total piston displacement:          9.726L

Rated RPM:                          1800r/min

Rated power:                        130kW

Oil consumption (at rated power output)

Fuel consumption:              ≤225g/kW.h

Lube oil consumption:          ≤1.8g/kW.h

Max. torque (≤1260r/min):          870N.m（1200-1300rpm）

Cooling method:                     closed circulation water cooling

Starting method:                    by electric at 24V 

Admissible altidude                 ≤4000m

 

 

制造厂家  　　　　                  上海柴油机股份有限公司

型号 　　　　　　                   G128ZG8

形式  　　　　　　                  直列、水冷、四冲程、增压直喷

缸数--缸径×行程 　                  6-135×150mm

总排量　　　　　　                  12.88 L

额定转速                            1800  r/min

标定功率                            130   kW

燃油消耗率（标定功率）              224   g/kW.h

机油消耗量                          0.7   g/kW.h

最大扭矩/转速                       838  N.m/1260 rpm

冷却方式                            闭式循环水冷却

启动方式                            24V电启动

空气滤清器：                        卧式两级滤清

许用海拔                            ≤4000m

Manufactured factory: SHANGHAI DIESEL ENGINE CO., LTD

Model:  G128ZG8

Type:  straight line, water-cooled, with four stroke, pressure boost and direct injection

Number of cylinders-bore×stroke:   6-135x150mm

Total piston displacement:   12.88L

Rated RPM:                   1800r/min

Rated power:                 130kW

Oil consumption (at rated power output)

Rated oil consumption        224g/kw.h

Lube oil consumption:        0.7g/kW.h

Max. torque:                 838N.m/1260rpm

Cooling method:              closed circuit water cooling

Starting method:             by electric at 24V 

Air filter:                  horizon, double filter

 

 

 

主离合器为常开式、多片湿式粉末冶金摩擦片，液压助力操纵，变速箱采用常啮合斜齿轮传动，结合套换挡，双杆机械操纵，前进五挡，后退四挡。

行驶速度：（柴油机1800rpm时理论速度）

前进：一挡 2.702km/h            后退：一挡 3.778km/h

      二挡 3.558km/h                  二挡 4.974km/h

      三挡 6.087km/h                  三挡 8.511km/h

      四挡 8.076km/h                  四挡 11.281km/h

      五挡 11.261km/h

 

The flywheel clutch: is constantly disengaged with multi-metal discs, which is operated by  hydraulically  boosting.

The transmission is mechanical double levers controlled with constantly meshed helical gears and coupling sleeve shift. It has five speeds forward and four speeds reverse :  

.Travel speed (as per diesel engine 1800r/min theoretical speed)

Forward                                 Backward

First  speed    2.702km/h                     First  speed      3.778km/h

Second speed   3.558km/h                     Second speed      4.974km/h

Third speed     6.08km/h                     Third speed        8.5114km/h

Forth speed     8.07km/h                     Forth speed        11.281km/h

Fifth speed     11.261km/h

 

 

 

转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。

制动器为湿式、浮动、双向带式、脚踏式机械操纵，液压助力，可实现转向与制动联动

The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.

The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.

 

 

 

 

两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。

 

The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.

 

 

 

行走架为槽钢钢板焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性能好、寿命长的浮动油封。

单侧支重轮数量     单边4个，双边3个

单侧托链轮数量     2个

单侧引导轮数量     1个

履带型式           三角截面、宽幅、组合式。

履带涨紧型式       液压涨紧

节距               203 mm

单侧履带板数量     43块

履带板宽度         1070mm

履带接地长度       3020mm

密封和润滑履带    （可选购件）

该履带的节距、履带板数量、履带板宽度与普通履带相同。

 

The undercarriage is section steel welded track roller frame with diagonal

brace.

The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.

Number of track rollers: 4 single-flange on each side

                  3 double-flange on each side

Number of carrier roller : 2 on each side

Number of front idler: one on each side

Track type: triangle section, modular type.

Track adjuster type: by hydraulically adjust

Pitch: 203 mm

Numbers of shoe: 43

Width of shoe: 1070mm

Length of track on ground: 3020mm

Sealed and lubricated track (0ptional parts)

The pitch, number of shoes, width of shoe are the same with ordinary track

 

 

 

 

由双联齿轮油泵、先导阀、主阀组及油缸、滤油器和管路组成

油泵型式         双联齿轮油泵

油泵流量         前泵190 L/min  先导泵   19 L/min

系统压力         12 MPa

It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.

Pump type:      two group gear oil pump

Pump flow :

Front pump :    190L/min       Pilot pump :19L/min

System pressure: 12MPa

 

 

 

 

噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。

备有以下驾驶室供用户选用

1. 带空调器的驾驶室。

2. 翻车保护司机凉棚。

3. 防翻架。

 

The cab with adjustable seat features low noise and wide visible range and contains electrical fan.

The different kinds of cabs as follow can be chosen:

1. Cab with air-conditioner

2. Cab with Rops canopy

3. Rops. 

 

 

 

 

 

加注部位                                容量（L）

水箱及柴油机冷却水                      60

柴油机润滑系统用油                      20(WD615)

                                        25(G128ZG8)

分动箱、主离合器用油                    35

变速箱、后桥传动用油                    95

最终传动用油（单侧）                    24

工作装置液压系统用油                    80

柴油箱装柴油                            285

支重轮、托链轮、引导轮用油（每个）      0.35

 

Fill location                                                Capacity(L)

Radiator and diesel engine water:                                  60

Lubricating system of diesel engine              Oil:              20(WD615)

                                                                   25(G128ZG8)

Flywheel house, main clutch ,                    oil:              35

Transmission, bevel gear case                    Oil:              95

Final drive(each side)                           Oil:              24

Implement hydraulic system                       Oil:              80

Fuel tank                                        Oil:              285

Track roller, carrier roller, front idler(each)  Oil:              0.35

 

 

 

 

铲刀型式 （Blade）                         直倾铲(Straight)  

铲刀宽度（Width）                          4222 mm

铲刀高度（Height）                         1035 mm

最大切土深度（Max digging depth）:         400mm

最大提铲高度（Max. ground clearance）:     957mm

垂直倾斜角Tilting angle:                   8.5°

铲刀容量（Blade capacity）:                   4.5m³

 

 

 

 

松土器主要参数：

 

松土齿数：                3个

长 ：                     1580mm

宽：                      2020mm

高：                      1236mm

最大松土深度：            550mm

最大提升高度：            510mm

 

 

 

Number of shank :         three

Length :                  1580mm

Width :                   2020mm

Max. Penetration  depth : 550mm

Max. Lifting height :     510mm