主要技术参数Technical Data | |
钻塔/Drilling tower | |
钻机高度/Height of tower(mm) | 23860 |
主机重量(不包括钻具) /Weight of base machine(without drilling tools)(kg) |
70500 |
加压油缸系统/Crowd cylinder | |
加减压油缸行程/Cylinder stroke( mm ) | 5700 |
油缸加压力/Cylinder pressure force(kN) | 220 |
油缸起拔力/Cylinder pulling force(kN) | 220 |
主卷扬机/Main winch | |
单绳拉力/Single line pull (kN) | 220 |
钢丝绳直径/Rope diameter(mm) | 26 |
最大提升速度/Line speed max.(m/min) | 60 |
副卷扬机/Auxiliary winch | |
单绳拉力/Single line pull (kN) | 75 |
钢丝绳直径/Rope diameter(mm) | 18 |
最大提升速度/Line speed max.(m/min) | 45 |
钻进参数/Drilling parameter | |
钻孔直径/Hole diameter(mm) | |
配FC10/equipped with FC10(mm) | 1000 |
配FC15/equipped with FC15(mm) | 1500 |
配FC18/equipped with FC18(mm) | 1800 |
配FC20/equipped with FC20(mm) | 2000 |
钻孔深度/Drilling Depth(mm) | 56000 |
动力头/Rotary head | |
动力头行程Stroke of sledge(mm) | 5600 |
回转扭矩/Rotary torque (kN.m) | 250 |
回转速度/Rotary speed (r/min) | 0-30 |
回转中心到钻孔中心距离/Center of swing gear to bore axis(mm) | 3675-4010 |
回转中心到主机尾部距离/Swing radius of rear end(mm) | 4160 |
桅杆倾斜度(向前/向后/左右)/Mast inclination(℃) | 5/15/4.5 |
桅杆底部距地面高度/Ground clesrance to bottom of mast (mm) | 1940 |
桅杆外侧到钻具中心距离/Clearance mast to bore axis(mm) | 1250 |
主机/Base Machine | |
发动机/Engine | |
柴油发动机/Diesel | Cummins C8.3-C(6CTA)/QSL221 |
额定功率/Diesel engine power (kW) | 194/221 |
发动机最大转速/Max.rotation speed(rpm) | 2200 |
液压系统/Hydraulic system | |
液压系统流量/Hydraulic system flow (L/min) | 2*260 |
液压系统压力/Hydraulic system pressure (bar) | 320 |
底盘/Chassis | |
可伸缩下底盘/Extendable chassis lower part | R305LC-7/JT70 |
履带板宽度/Width of triple grouser track shoes (mm) | 800 |
底盘长度/Chassis length (mm) | 5680 |
底盘宽度(缩进/伸出)/Chassis width(contraction/extension) (mm) | 3200/4300 |
牵引力/Towing force(kN) | 500 |
行走速度/Crawler speed(km/h) | 1.5 |
空压机型号 /Air compressor model | OG160ZF |
运输重量/Transport Weight | |
底盘+配重+空压机+支架+下桅杆总成+绞盘总成(Kg) Base carrier with lower mast,winch,counterweight,boom cylinder and hose drum |
55000 |
上桅杆总成+天车(Kg)/Upper mast,mast head | 4500 |
注:本页面型号参数配置等信息仅供参考,实际型号参数配置等信息以店内销售为准,解释权归生产厂家所有。