宣工 TY165  液力推土机参数配置

          TY165

 

 

 

 

    TY165推土机系半刚性悬挂、液力机械传动、液压操纵的履带推土机。可用于道路修筑、水电工程、农田改造、港口建设矿山开发及其它建筑工程项目的土石方作业。

TY165 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions.

 

 

 

 

外形尺寸(长×宽×高)    　5336×3297×2936.5 mm (直倾铲)

                          5486×3762×2936.5 mm (角铲)

使用质量    　　　　　　　16.9t(直倾铲)；17t(角铲)

飞轮功率    　　　　　　　121 kW

最大牵引力   　　　　　　 132.5 kN（直倾铲）；133.3 kN（角铲）

(有效牵引力取决于机重和地面附着性能)

接地压力（使用重量）      64.4KPa

最小转弯半径　　　　　　　3.9 m

最小离地高度  　　　　　　352.5 mm

坡行角度　　　　　　　　　纵向 30度　　横向 25度

单铲容量                  4.5m³ (直倾铲);4.9m³ (角铲)

 

Overall dimensions (L×W×H) :   5336×3297×2936.5 mm (straight)

                                5486×3762×2936.5 mm (angle )

Operation weight:               16.9t(straight);17t(angle )

Flywheel power:                 121 kW

Max. drawbar pull:              132.5 kN（straight）；133.3 kN（angle）

(The efficient force depends on weight and ground surface adherence)

Ground pressure (at operating weight):   64.4KPa

Min. ground radium:             3.9 m

Min. ground clearance:          352.5 mm

Grade ability:                  Straight 30°　　

                                Side  25°

Capacity of single blade:       4.5m³ (S);

4.9m³ (A)

 

 

 

Diesel engine       

制造厂家                   上海柴油机股份有限公司

型号                       C6121ZG01a

形式  　　　　　　         直列、水冷、四冲程、增压、直喷

缸数--缸径X行程 　         6-121×152

总排量　　　　　　         10.5 L

额定转速                   1900 r/min

标定功率                   131  kW

最大扭矩/转率               ≥790N.m/≤1400r/min

燃油消耗量（标定工况）      ≤224 g/kW.h

机油消耗量                  ≤0.6 g/kW.h

许用海拔                    ≤4000 m

冷却方式                    闭式循环水冷却

启动方式                    24V电启动

 

Model:                      C6121ZG01a

Type:   straight line, water-cooled, with four stroke, pressure boost and direct injection

Cylinders Number-bore diameter×travel distance:   6-121×152mm

Displacement:                                     10.5L

Rated RPM:                                        1900r/min

Rated power:                                      131kW

Max. torque                                       ≥790N.m/≤1400r/min

Fuel  consumption (at rated working condition)

                                                  ≤224g/kW.h

oil consumption:                                  ≤0.6g/kW.h

Admissible altitude                               ≤4000m

Cooling method:    closed circulation water cooled

Starting method:   electrically starting  at 24V  pressure   

 

 

 

 

 

变矩器为单极三元件结构。扭矩由机械和液力两部分组合输出，输出动力平稳，具有良好性能。

变速箱为行星传动，动力换档变速箱，前进三档，后退三档，可实现档位和方向的快速变换。

行驶速度：（按柴油机1900r/min时理论速度）

前进：一挡 0-3.317  km/h            后退：一挡 0-4.000  km/h

      二挡 0-6.620  km/h                  二挡 0-7.569  km/h

      三挡 0-11.407 km/h                   三挡 0-13.874 km/h

     

single-stage, three units structure torque converter, mechanical and hydraulic combined, output stable with high performance.

Planetary, power shift transmission with three speeds forward and three speeds reverse. Speeds and direction can be quickly shifted.

Travel speed (in theory 1900r/min engine speed):

 

Forward                                 Reverse

First  speed     0-3.317km/h                First  speed     0-4.000km/h

Second speed    0-6.620km/h                Second speed     0-7.569km/h

Third speed     0-11.407km/h               Third speed       0-13.874km/h

 

 

 

 

转向离合器湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。

制动器为湿式、浮动、双向带式、脚踏式机械操纵.

 

 The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.

The brakes are oil, two-direction floating band with mechanism foot pedals.

 

 

 

 

两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。

The final drives are double reduction with spur gear and segment sprocket, which are sealed by duo-cone seal

 

 

 

 

行走架为槽钢焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性好、寿命长的浮动油封。

支重轮（每侧）

      单边                四个

      双边                二个

托链轮（每侧）            二个

引导轮（每侧）            一个

履带型式                  单履齿组合式

履带涨紧型式              液压涨紧

节矩                      203 mm

履带板数（每侧）          38 块

履带板宽                  500 mm

履带接地长度              2570 mm

密封和润滑履带▲

该履带的节距、履带板数、履带板宽与普通的履带相同。

 

Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.

Track roller (each side):

Singe flange              4

Double flange            2

Carrier roller(each side):        2

Idler (each side)               1

Type of track:               single grouser combined

Tension mode of track:        hydraulic

Pitch:                      203mm

Number of shoes(each side)    38 pieces

Width of shoe               500mm

Length of track on ground     2570mm

Sealed and lubricated track ▲

The pitch , numbers and width of track shoes are the same with the general track.

 

 

 

 

由装置油泵、液压油箱及各种阀、油缸、滤油器和管路组成。

油泵型式            齿轮油泵

系统流量            190L/min  

系统压力            11.76MPa   

单阀（内置）：用于角铲、推煤铲。可实现铲刀油缸的提升、封闭、下降、浮动。

双阀（内置）：用于直倾铲。可实现铲刀油缸的提升、封闭、下降、浮动，同时侧倾缸左侧倾、右侧倾、封闭。

双阀（一个内置、一个外置）：用于角铲、松土器。可实现铲刀油缸的提升、封闭、下降、浮动，松土油缸可实现提升、封闭、下降。

三阀（二个内置、一个外置）：用于直倾铲。松土器可实现铲刀油缸的提升、封闭、下降、浮动，同时实现侧倾缸左侧倾、右侧倾、封闭。松土油缸可实现提升、封闭、下降。

 

It consists of implement pump , hydraulic tank and various valves , cylinders , filters and lines .

Pump type                        gears oil pump

Pump model                       CBF-E100A(reverse)

System output                    190L/min  

System pressure                    11.76MPa     

Single valve(built in):used in angle blade, coal pushing blade to control lift, hold, lower, float for the blade cylinder.

Double valve (built in: used in straight blade to control lift, hold, lower. Float for blade cylinder, at same time to realize left tilting, right titling, hold of titling cylinder.

Double valve (one built-in, another at outside): used in angle blade, ripper to realize lift, hold , lower, float for the blade cylinder and to realize lift, hold, lower for the ripper cylinder.

Three valves: (two built-in, one at outside) used in straight blade to realize lift, hold, lower, float for blade cylinder at same time to realize left titling, right tilting, hold for titling for titling cylinder. Ripper cylinder can move to lift. Hold, lower positions.

 

 

 

 

 

油泵型式           齿轮油泵

油泵流量           135 L/min

系统压力           2.35MPa

Pump type: gear oil pump

System output:     135 L/min

System pressure:   2.35MPa

 

 

 

 

 

噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。

备有以下驾驶室供用户选用

1. 带空调器的驾驶室。

2. 翻车保护司机凉棚。

3．简易司机凉棚。

 

The cab with adjustable seat features low noise and wide visible range and contains electrical fan.

This following different kinds of cabs as follow can be chosen:

1. Cab with air-conditioner

2. Cab with Rops  

3. Simple structure canopy

 

 

 

 

 

加注部位                               容量（L）

水箱及柴油机冷却水                      60

柴油机润滑系统用油                      25

分动箱、变矩器 变速箱、后桥传动用油     95

最终传动用油（单侧）                    24

工作装置液压系统用油                    85

柴油箱装柴油                            230

支重轮、托链轮、引导轮用油（每个）      0.35

 

Fill location                                                Capacity(L)

Radiator and diesel engine water:                                  60

Lubricating system of diesel engine             Oil:              25

 Transmission, bevel gear case                    Oil:              90

Final drive(each side)                           Oil:              24

Implement hydraulic system                       Oil:              85

Fuel tank                                        Oil:              230

Idle track roller, carrier roller, front idler(each)  Oil:         0.35

 

 

 

 

铲刀型式                             角铲        直倾铲           推煤铲

Blade                               Angle        Straight     Coal pushing

铲刀宽度（Width）                   3762mm       3297 mm        4240mm

铲刀高度（Height）                  1140mm       1170 mm        1150mm

最大切削深度（Max digging depth）:   400mm       400mm

最大提升高度（Max. ground clearance）:1000mm     915mm          1000mm

垂直倾斜角(Vertical tilting angle):     8.5°      8.5°            9° 

铲刀容量（Blade capacity）:           4.9 m³       4.5m³                     9 m³

 

 

 

松土器主要参数：

 

松土齿数(Number of shand)   3个               1

长(length) ：               1580mm            1580mm

宽(width)：                 2020mm            1090mm

高(Height)：                1236mm            1236mm

最大松土深度：              550mm             550mm

(Max penetration)

最大提升高度：              510mm             510mm

(Max clearance)

 

 

注：▲表示可选购物

Note： ▲indicates optional parts